EAP245 V3 and software contoller 5.9.31. Airtime fairness, can't find where to enable it.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP245 V3 and software contoller 5.9.31. Airtime fairness, can't find where to enable it.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP245 V3 and software contoller 5.9.31. Airtime fairness, can't find where to enable it.
EAP245 V3 and software contoller 5.9.31. Airtime fairness, can't find where to enable it.
2023-08-30 15:23:48 - last edited 2023-08-30 18:03:43
Model: EAP245  
Hardware Version: V3
Firmware Version: 5.1.0

So, I am very new to Omada and the software controller.  Running it in Docker on Unraid server at the moment.

 

I have several 2.4gHz IoT devices that share this AP and a handfull of 5gHz devices as well.  I would like to enable airtime fairness on the AP or even at the controller level, but for the life of me I can't find where to enable it.  It seems to me that it should be under Device/config/advanced, but there I only have a grayed out load balance and a few other unrelated settings.

 

So, where am I missing the setting?

  0      
  0      
#1
Options
1 Accepted Solution
Re:EAP245 V3 and software contoller 5.9.31. Airtime fairness, can't find where to enable it.-Solution
2023-08-30 17:35:16 - last edited 2023-08-30 18:03:43

  @MattWard 

 

you find it unde site config and advanced

 

Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:EAP245 V3 and software contoller 5.9.31. Airtime fairness, can't find where to enable it.-Solution
2023-08-30 17:35:16 - last edited 2023-08-30 18:03:43

  @MattWard 

 

you find it unde site config and advanced

 

Recommended Solution
  1  
  1  
#2
Options
Re:EAP245 V3 and software contoller 5.9.31. Airtime fairness, can't find where to enable it.
2023-08-30 18:04:33
Thanks, did not realize that drill down was there because I never opened beacon control!
  0  
  0  
#3
Options
Re:EAP245 V3 and software contoller 5.9.31. Airtime fairness, can't find where to enable it.
2024-02-02 21:01:49 - last edited 2024-02-02 21:02:33

Select a site from the drop-down list of Organization in the top-right corner, go to Settings > Site, and enable Advanced Features in Services first.

Then configure the in Advanced Features > Beacon Control > choose frequency. Click Save for each frequency.

  0  
  0  
#4
Options