How to Configure TL-ER7206 multiple VLANs, WAN Dyn IP, IPv6 Prefix Len < 64 via OC200 controller?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to Configure TL-ER7206 multiple VLANs, WAN Dyn IP, IPv6 Prefix Len < 64 via OC200 controller?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to Configure TL-ER7206 multiple VLANs, WAN Dyn IP, IPv6 Prefix Len < 64 via OC200 controller?
How to Configure TL-ER7206 multiple VLANs, WAN Dyn IP, IPv6 Prefix Len < 64 via OC200 controller?
2023-08-26 16:08:05
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.3.1 Build 20230525 Rel.66228

 

Network environment:

ER7206 v1.0 running firmware version 1.3.1 Build 20230525 Rel.66228 and controlled by an OC200 2.0 hardware controller firmware version 2.9.3 Build 20230328 Rel.52390 and controller software version 5.9.32.

 

Ask:

Seeking tips, guidance, or updated docs to configure a TP-Link network and IPv6 firewall rules to assign public dynamic respective IPv6 address to each VLAN, to assign the VLAN network hosts IPv6 addresses via SLAAC+Stateless DHCP/DHCPv6, and to protect from unauthorized external access via IPv6 traffic.

 

Thank you in advance for sharing tips and knowledge.
 

  0      
  0      
#1
Options
1 Reply
Re:How to Configure TL-ER7206 multiple VLANs, WAN Dyn IP, IPv6 Prefix Len < 64 via OC200 controller?
2023-08-27 09:02:26
  0  
  0  
#2
Options