Business Community > Routers > How do I get access from another network?
< Routers

How do I get access from another network?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How do I get access from another network?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How do I get access from another network?
How do I get access from another network?
2023-07-09 09:47:53 - last edited 2023-07-10 07:34:55
Tags: #WAN Setup #VLAN & Multi-Networks #NAT
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.0.3 Build 20230411 Rel.43102

Hi guys.
Another router is connected to the second wan port, which has a 10.10.1.0/24 network. My network has an address of 10.10.12.0/24. What rule is needed to get from the 10.10.1.0/24 network to the 10.10.12.0/24 network. Is this possible? Or maybe it should be done in some other way?
Internet access is only needed via WAN1

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:How do I get access from another network?
2023-07-10 07:34:09

Hi @Dapany 

Depending on what kind of service you want to access.

First, NAT is the issue here when you access from the first router 10.10.1.0/24 to 10.10.12.0/24. (I'll simplify it to 1.0/24 and 12.0/24)

You need to open ports to the services that are located on 12.0/24. That is to say, you need to port forward on ER8411 to open up these ports.

Second, if you want to access the 1.0/24 from 12.0/24, you should be fine. But if you run into issues when accessing them, that could be the routing table issue. You need to print or tracert(command line or you can use the diagnostics tool) to find out what part of the routing table is missing.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:How do I get access from another network?
2023-07-10 09:22:34

  @Clive_A 

There is access to 1.0/24 from 12.0/24.

We need full access from the 1.0/24 network to the 12.0/24 network. I understand that NAT is to blame for everything and there is no way to turn it off?

  0  
  0  
#3
Options
Re:How do I get access from another network?
2023-07-11 00:47:00

 Hi @Dapany 

No, you cannot turn it off. This is a router working as a NAT.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 486

Replies: 3

Tags

WAN Setup VLAN & Multi-Networks NAT
Related Articles
cannot get WAN on ER8411 to accept a DHCP response
514 0
Discovering WAPs on another network
816 0
Potential subnetting issue with VLAN's and stuck, could use some help/education.
641 0
I can't ping a device with IPv6 from another VLAN
109 0
Port Forwarding on ER8411
590 0
Adopting devices from another network to my controller
40 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.