Currently, my eap110 outdoor is assigned a dynamic address. I would like this to be static but my understanding of gateways etc is very basic so I am unsure how to set this.

My bt router ip address is defined as follows:

The eap110 has been assigned an address of 192.168.1.155 currently.

When I click the eap110 static option, I get this:

Assuming I wanted to stick with 192.168.1.155 as the static ip address, what should I have in the ip address, ip mask, gateway and primary dns fields?

I am not fixed on 155 as the address and could use one in the 192.168.1.0 - 192.168.1.63 range as seemingly defined as not dhcp on the bt router.