Hello everyone, I have a huge problem with these two products (CPE710 - CPE210), I have installed 3x CPE710 from a client of mine who use 5Ghz as the main connection between 3 industrial warehouses, they are distant from the main one respectively (268m and 86m), I am attaching the configuration of all three antennas and the schemino depicting the positioning of the antennas.
In addition to the CPE710s, I have also mounted 3x CPE210s which I use as backup antennas in case of malfunction.
Explained the configuration now I expose the main problem:
I noticed for 1 month of malfunctions at the level of connection between the shed with the server antenna and the farthest one (268m), I continued to see the wireless signal between the two antennas and they remained connected, but unfortunately I stopped reaching the gateway and the various servers that were in the main shed, almost as if there was a packet routing problem, the neighboring shed did not seem to have any kind of problem, holding up various pings I just saw that some after a non-recurring amount of time the route or how say the communication to that host was interrupted.
I turned off the antenna in the middle, between the main shed with the server antenna and the one further away and I'm not having any more problems of any kind.
I am attaching the positioning scheme plus the configuration screenshots, I hope for your reply.
Sincerely, James Lattanzio.

SERVER ANTENNA

CLIENT ANTENNA