OC200 will not recognise USB flash drive for backup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 will not recognise USB flash drive for backup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 will not recognise USB flash drive for backup
OC200 will not recognise USB flash drive for backup
2022-07-03 17:21:13 - last edited 2022-07-03 17:23:22
Model: OC200  
Hardware Version: V1
Firmware Version: 1.15.2 Build 20220323 Rel.60717

Simple enough..., the OC200 is powered over PoE by a TL-SG2428P, plug a USB Key formatted as FAT32 and nothing..., apart from the "No storage device is connected to the USB port" message.

 

Thoughts ?

  0      
  0      
#1
Options
4 Reply
Re:OC200 will not recognise USB flash drive for backup
2022-07-04 12:23:00

  @Tescophil 

 

As far as I know, there are no compatibility issues between the FAT32 USB and the OC200.
Suggest you check if your USB device itself is working?
If you have another USB device, you can replace it and test.

 

 

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:OC200 will not recognise USB flash drive for backup
2022-07-04 12:33:36

  @Virgo 

 

Yes, 4 different USB keys and an SSD, nothing

 

 

 

 

 

 

 

 

 

 

 

 

 

  0  
  0  
#3
Options
Re:OC200 will not recognise USB flash drive for backup
2022-11-21 20:33:10

  @Tescophil 

 

did you fixed this issue?

here i have exact the same issue, with latest firmware on oc200

 

no backup possible, no usb present according controller

 

rgds

patrick

  0  
  0  
#4
Options
Re:OC200 will not recognise USB flash drive for backup
2023-04-01 14:47:50

  @Pksparks I reformatted my USB to NTFS and it was recognized afterwards.

  0  
  0  
#5
Options