Home

Forums

Stories

Knowledge Base

Business Community > Controllers > OC200 I cannot get the USB front port to work with any flash or HDD - Looking to get Auto Backup on

< Controllers

OC200 I cannot get the USB front port to work with any flash or HDD - Looking to get Auto Backup on

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 I cannot get the USB front port to work with any flash or HDD - Looking to get Auto Backup on

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

motffc

2021-03-06 19:08:51 - last edited 2021-03-09 03:06:46

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-03-06

OC200 I cannot get the USB front port to work with any flash or HDD - Looking to get Auto Backup on

2021-03-06 19:08:51 - last edited 2021-03-09 03:06:46

Model: OC200

Hardware Version: V1

Firmware Version: 4.2.11

I have the OC200 Controller. I cannot get the USB front port to work with any flash or hard drive.

I was powering the O200 via the micro USB port using a micro USB cable. Which powers up fine. But I cannot use the USB on the front still.

I had a spare EAP225 Gigabit Passive PoE adaptor, tried this and it doesn't power up the OC200 at all.

Am correct to say that to use the front USB 2.0 port for extra storage: I need to use a PoE switch only to power this O200 to allow me to use the USB 2.0 on the front for extra storage?

I don't want to have to go an buy a PoE switch if this won't solve the issue. I was hoping the EAP225 Gigabit Passive PoE adaptor would work...

This is what I am stuck on and unable to enable using the EAP225 Gigabit Passive PoE adaptor or the Micro USB Power:

This screen shot shows that someone else has got it working, this is what i want to achieve:

1 Accepted Solution

MR.S

LV5

2021-03-07 01:07:29 - last edited 2021-03-09 03:06:46

Posts: 2133

Helpful: 770

Solutions: 271

Stories: 0

Registered: 2018-08-17

Re:OC200 I cannot get the USB front port to work with any flash or HDD - Looking to get Auto Backup on-Solution

2021-03-07 01:07:29 - last edited 2021-03-09 03:06:46

@motffc You have to power it with 802.3af/at PoE, not 24V Passive PoE that EAP225 use
this adapter will work.

https://www.tp-link.com/us/business-networking/accessory/tl-poe150s/

OC200 I cannot get the USB front port to work with any flash or HDD - Looking to get Auto Backup on

OC200 I cannot get the USB front port to work with any flash or HDD - Looking to get Auto Backup on

Information

Voters 0

Tags