Home

Forums

Stories

Knowledge Base

Business Community > Routers > How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

< Routers

How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OPMASH

2022-06-19 03:56:31 - last edited 2022-07-07 04:24:23

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-09-04

How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

2022-06-19 03:56:31 - last edited 2022-07-07 04:24:23

Tags: #VLAN & Multi-Networks

Model: TL-ER6120

Hardware Version: V3

Firmware Version: 3.0.1 Build 20180724 Rel.80086

Model: TL-ER6120

Hardware Version: V3

Firmware Version: 3.01

ISP: TM UNIFI (Malaysia)

Im able to configure VLAN 500 to Port WAN 1

But unable to configure VLAN500 to Port WAN 2 - 4

My Client need to use VLAN500 for all WAN port 1- 4

Kindly advise

3 Reply

Somnus

LV5

2022-06-21 03:37:41

Posts: 1212

Helpful: 219

Solutions: 72

Stories: 0

Registered: 2021-06-14

Re:How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

2022-06-21 03:37:41

@OPMASH Basically all tplink routers cannot do same VLAN ID on multi WAN ports. I have ER605 (newer than ER6120) and it does not support it. I've read some posts in this forum and people with ER7206 also can't do it.

Tedd404

LV4

2022-06-21 15:44:34 - last edited 2022-07-07 04:24:23

Posts: 584

Helpful: 144

Solutions: 35

Stories: 0

Registered: 2022-01-05

Re:How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

2022-06-21 15:44:34 - last edited 2022-07-07 04:24:23

@OPMASH

no you cannot do it. there was a post that people using switch to configure the ports with vlan and finally made it. that's the workaround.

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.

OPMASH

LV1

2022-07-07 04:28:41

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-09-04

Re:How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

2022-07-07 04:28:41

1. Actualy for now just need VLANID500 For WAN1 (Configured - OK) & WAN2 (Cannot Configure) 2. Can you point community posting the workaround 3.. Is there firmware update to pacth this?

How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

How to configure vlan500 in all WAN Port (WAN 1 - WAN4)

Information

Voters 0

Tags