@caramb You're still not using the latest Beta firmware which is 2.1.2 Build 20230221 Rel.41247

Beta Firmware Download:

https://static.tp-link.com/upload/beta/2023/202302/20230228/ER605v2_un_2.1.2_20230221(Beta).zip

Please be sure you have read the Beta Test Agreement before proceeding!

Beta Release Note:

Fixed the repeating notification of "[Gateway] was connected" issue based on the official firmware 2.1.2_Build 20230210.

I've had no issues after upgrading to this version.

Tescophil wrote

  @caramb You're still not using the latest Beta firmware which is 2.1.2 Build 20230221 Rel.41247

 

Beta Firmware Download:

 

https://static.tp-link.com/upload/beta/2023/202302/20230228/ER605v2_un_2.1.2_20230221(Beta).zip

 

Please be sure you have read the Beta Test Agreement before proceeding!

 

Beta Release Note:

 

Fixed the repeating notification of "[Gateway] was connected" issue based on the official firmware 2.1.2_Build 20230210.

 

I've had no issues after upgrading to this version.

  @Tescophil 

Hi,

You're right.

Comparing the build number (41247 for the beta, 62992 for the official); I assumed the official was including the fix.

But comparing the "release date" (20230221 for the beta, 20230210 for the official) + reading the release notes of the beta, it is definitively not the case.

I will proceed with the upgrade.

I also starting facing this disconnects with the ER605v2. They does not affect the internet connection only the visibility to the controller. In 3 days I got over 10.000 log entries until the ER605 lost his connection to the controller completely.

I installed it december last year. 

caramb wrote

Tescophil wrote

  @caramb You're still not using the latest Beta firmware which is 2.1.2 Build 20230221 Rel.41247

 

Beta Firmware Download:

 

https://static.tp-link.com/upload/beta/2023/202302/20230228/ER605v2_un_2.1.2_20230221(Beta).zip

 

Please be sure you have read the Beta Test Agreement before proceeding!

 

Beta Release Note:

 

Fixed the repeating notification of "[Gateway] was connected" issue based on the official firmware 2.1.2_Build 20230210.

 

I've had no issues after upgrading to this version.

  @Tescophil 

Hi,

 

You're right.

Comparing the build number (41247 for the beta, 62992 for the official); I assumed the official was including the fix.

But comparing the "release date" (20230221 for the beta, 20230210 for the official) + reading the release notes of the beta, it is definitively not the case.

 

I will proceed with the upgrade.

  @caramb 

Sounds good.

It's been 1 week since I upgraded to the beta firmware.

No issue so far.

Recurring connectivity issue and disconnection from the Omada controller issue are both fixed.

  @OneBadGADawg 

I also updated my ER605 v2.0 from firmware

from

Firmware Version:  2.1.2 Build 20230210 Rel.62992

to

Firmware Version: 2.1.2 Build 20230221 Rel.41247 (this is the beta)

and now there are 18hours since the upgrade to the beta firmware with no disconnect issues

If something changes I will give an update.

LOL, I bought a TP-Link ER605 to have a dual wan router so I could connect a second ISP for automatic failover in the rare event that the primary ISP went down, and now my ER605 has gone down for no good reason 3 times in the 6 hours that I have installed it. Way to go, Toilet Paper-Link!

  @OneBadGADawg 

Same problem here! Version 2 with Firmware Version: 2.2.0 Build 20230629 Rel.64012.

I have 30 routers which one connected to an OC200 and this random disconnections are freaking me out!.