Is it better to use a mesh system or the fast roaming?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have a EAP615 wall, and 2 EAP245s. All are hardwired to the main Omada system. Is it better to use a the fast roaming system or a mesh? Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey
You may be confusing terms, Mesh and Fast Roaming are very different things.. ill try to explain
Fast Roaming is simply the ability of a client device (phone, laptop etc) to move from Acess Point 1 to Acess Point 2 without disconnecting. Regardless of how you have the Access Points setup (cabled or over WiFi) you will likely want to enable this
MESH is nothing to do with client devices, its basically HOW the access points will talk to each other. If you have 2x APs and both are cabled in, no point enabling MESH. However if you want to add an AP that's not going to be cabled into the LAN (it will connect wirelessly) then enable MESH. In short MESH allows you to connect APs via WiFi without needing a cable connection / switch, however it will be slower as the APs communicate over WiFi and not a cable.
Hopefully that helps?
Fast Roaming, if you have more than 1 AP enable it. Only works on 2 or more APs which you have ENABLE
Mesh.. don't enable it unless you want to connect APs via WiFi (not cable)
- Copy Link
- Report Inappropriate Content
Hey
You may be confusing terms, Mesh and Fast Roaming are very different things.. ill try to explain
Fast Roaming is simply the ability of a client device (phone, laptop etc) to move from Acess Point 1 to Acess Point 2 without disconnecting. Regardless of how you have the Access Points setup (cabled or over WiFi) you will likely want to enable this
MESH is nothing to do with client devices, its basically HOW the access points will talk to each other. If you have 2x APs and both are cabled in, no point enabling MESH. However if you want to add an AP that's not going to be cabled into the LAN (it will connect wirelessly) then enable MESH. In short MESH allows you to connect APs via WiFi without needing a cable connection / switch, however it will be slower as the APs communicate over WiFi and not a cable.
Hopefully that helps?
Fast Roaming, if you have more than 1 AP enable it. Only works on 2 or more APs which you have ENABLE
Mesh.. don't enable it unless you want to connect APs via WiFi (not cable)
- Copy Link
- Report Inappropriate Content
@Philbert Well, I do actually understand how a mesh system works, but I am not sure how the Omada mesh system works I guess. I had an Asus Mesh system. It was a hard wired mesh system, or that is what they called it anyway.
Thanks for the lowdown on how the Omada mesh works.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3197
Replies: 2
Voters 0
No one has voted for it yet.