ER605 suddenly disconnect from omada controller but still working
![](https://static-community.tp-link.com/icon/8bf66a97a312426682cb1acc88b1a597.jpeg)
I maked a setup for a office clients, it is start to run 25 day ago, once a week I check the network status remotly to see how everithing it is working. For my sorprise, I saw the ER605 disconnected. Obiously if the router was off, I would not have internet becouse my ISP is connected there.
I didn't reset the router becouse im far of the office, and system still working.
Does anyone have a problem like this?
If i reboot router manually and it works again, do I need make a reboot schedule?
Thank you.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you, I'll make a reboot schedule for try to correct that problem, I'll comment you if that works @jwaltrip
- Copy Link
- Report Inappropriate Content
Using 5.1.7 and it happens to me every week or two.
I reboot the the router and it is OK for a while.
Planning to update to 5.3.1 soon as I can to see if fixed
- Copy Link
- Report Inappropriate Content
@titocarnale What is the verison of your controller? It's hardware controller OC200?
I'm running Software controller with ER605 for month and I did not find this issue. Maybe it is related to the controller version
- Copy Link
- Report Inappropriate Content
Yes , is a hardware controller oc200 version 5.1.7 @Somnus
- Copy Link
- Report Inappropriate Content
Thank you, I'll make a reboot schedule for try to correct that problem, I'll comment you if that works @jwaltrip
- Copy Link
- Report Inappropriate Content
FWIW I'm running the same setup (OC200 5.1.7, ER605 1.2.0) with the same IP's for router and switch and I do not have this issue.
** Turns out I do, masked by glitchy power grid in area...as soon as I put the system on a UPS....I started to experience this. See later post V V V
- Copy Link
- Report Inappropriate Content
@d0ugmac1 how many days the system is running?
- Copy Link
- Report Inappropriate Content
I am running on an ubuntu VM on same subnet as rotuers and switches. reboot schedule does not help as if it fails on a friday and reboot is on sunday, the reboot fails.
When the router disconnect, internet and everything still works. I restart the router (powr off and on) and it reconnects.
- Copy Link
- Report Inappropriate Content
@jwaltrip can I program the reboot schedule stand alone?. And try to avoid the problem to program the reboot schedule using controller
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@d0ugmac1 my router disconected almost 22 days of power up. If you have the same problem when you have that date, let me know.
- Copy Link
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/8bf66a97a312426682cb1acc88b1a597.jpeg)
Information
Helpful: 3
Views: 15253
Replies: 66
Voters 1
![voter's avatar](/avatar/avatar-18.png)