Only one selected VLan on the three bottom Lan-Ports from EAP225 Wall

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Only one selected VLan on the three bottom Lan-Ports from EAP225 Wall

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Only one selected VLan on the three bottom Lan-Ports from EAP225 Wall
Only one selected VLan on the three bottom Lan-Ports from EAP225 Wall
2022-02-26 14:51:00

Hi there,

 

I have integrated an EAP225 into my Omada SDN.
The EAP225 has three Lan ports at the bottom.


How or where can I select that only my VLAN4 is available on these three Lan ports?

Thanks :)
 

  0      
  0      
#1
Options
2 Reply
Re:Only one selected VLan on the three bottom Lan-Ports from EAP225 Wall
2022-02-28 13:00:39
EAP225-Wall LAN ports cannot do VLAN. You may consider your client device connects to this LAN port work like it connects to the switch directly. So we need to do settings on the switch, set up Profile(one the Network settings) that VLAN 4 untag. However, with these settings your EAP SSID can not use VLAN 4 anymore. It's a hardware limitation I don't know if tplink can improve it
  0  
  0  
#2
Options
Re:Only one selected VLan on the three bottom Lan-Ports from EAP225 Wall
2022-02-28 13:39:56

  @Somnus 

Right?

But if i switch the EAP to a e.g. VLAN4 Port, does than works all WiFi' s on this EAP Wall?

Think then only the WiFi works, whitch is configurated for VLAN4, or?

  0  
  0  
#3
Options