Business Community > Controllers > No IP Settings SG2210P v3.20
< Controllers

No IP Settings SG2210P v3.20

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No IP Settings SG2210P v3.20

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No IP Settings SG2210P v3.20
No IP Settings SG2210P v3.20
2021-06-21 14:29:21 - last edited 2021-06-22 07:59:59
Model: SG2210P  
Hardware Version: V3
Firmware Version: 3.20.1

Hi,

For some reason I can't change the IP from DHCP to static for my SG2210P. This setting is available for my AP's. In the Omada switch documentation this option is available, but not in my controller.

 

I am using a Windows Omada controller v4.3.5.

 

How can I fix this issue?

 

Thanks in advance.

 

Edit: link to Omada documentation.

 

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:No IP Settings SG2210P v3.20-Solution
2021-06-22 01:30:10 - last edited 2021-06-22 07:59:59

Dear @Travka,

 

Travka wrote
For some reason I can't change the IP from DHCP to static for my SG2210P. This setting is available for my AP's. In the Omada switch documentation this option is available, but not in my controller.

I am using a Windows Omada controller v4.3.5.

 

The firmware Build 20210407 has moved the IP settings to the VLAN Interface, which is the same as the IP settings in Standalone mode.

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#8
Options
9 Reply
Re:No IP Settings SG2210P v3.20
2021-06-21 14:55:53

@Travka 

 

Yaaah you have right, they have forgett this, same on SG2008P, SG2210MP and SG2428P.

 

I have not used this and have not seen it.. but this should be basic on a network device..

 

 

 

  0  
  0  
#2
Options
Re:No IP Settings SG2210P v3.20
2021-06-21 15:41:12

@Travka 

 

I do some test on SG2008P and the first firmware release have option to change ip. mybe this is the same for your switch

 

  0  
  0  
#3
Options
Re:No IP Settings SG2210P v3.20
2021-06-21 19:25:06

@shberge Can you send me a link to the firmware you used?

  0  
  0  
#4
Options
Re:No IP Settings SG2210P v3.20
2021-06-21 19:31:42

@Travka You cant use same firmware but firmware to your switch is her,

 

https://static.tp-link.com/2020/202009/20200915/TL-SG2210P(UN)_V3.2_20200730.zip

 

https://www.tp-link.com/en/support/download/tl-sg2210p/#Firmware

 

I Guess the first firmware have option to change ip.

 

I test on SG2008P and this is another switch.

 

 

 

  0  
  0  
#5
Options
Re:No IP Settings SG2210P v3.20
2021-06-21 19:53:47
I tested that firmware and it still doesn't give me the option to change the IP. This option should be the bare minimum for any product networking product..
  0  
  0  
#6
Options
Re:No IP Settings SG2210P v3.20
2021-06-21 20:04:38

@Travka 

Yes agree, sg2008p have ip option in ver 1.0 firmware , so have they problably forgot it in the latest firmware, I dont use static ip on SDN switch but it should be an option. 

  0  
  0  
#7
Options
Re:No IP Settings SG2210P v3.20-Solution
2021-06-22 01:30:10 - last edited 2021-06-22 07:59:59

Dear @Travka,

 

Travka wrote
For some reason I can't change the IP from DHCP to static for my SG2210P. This setting is available for my AP's. In the Omada switch documentation this option is available, but not in my controller.

I am using a Windows Omada controller v4.3.5.

 

The firmware Build 20210407 has moved the IP settings to the VLAN Interface, which is the same as the IP settings in Standalone mode.

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#8
Options
Re:No IP Settings SG2210P v3.20
2021-06-22 07:54:55

@Fae 

 

yes indeed, this one was well hidden. smiley

  0  
  0  
#9
Options
Re:No IP Settings SG2210P v3.20
2021-06-22 08:00:54
Tested this and wouldn't classify it as the ideal position, but it works. Thank you for your reply.
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 1558

Replies: 9

Related Articles
updated SG2210P?
316 0
SG2210P LAG LACP ?
770 0
is TL-SG2210P POE+ compliant?
449 0
 [SG2210P 4.0] set "ip management-vlan xxx"
822 0
Wrong and no icon after firmware upgrade SG2210P v5.20
2775 1
Trunk port on TL-SG2210P and TL-SG3424
987 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.