@zbyndatvrd 

Checking on the online manual, pages 75 / 76 it appears you can indeed disable POE per port.  However, I have not tested it personally.

https://static.tp-link.com/2020/202011/20201102/1910012910_Easy%20Smart%20Switch_UG.pdf

Hi @Philbert , all.

The online document says:

"PoE configuration is only available on certain devices. To check whether your device supports this feature, refer to the actual web interface."

Certain devices... Would be good to have some list of "certain devices" :) 

I'd like to clarify the functionality before I purchase the device.

Looking into the device datasheet, it does not explicitly mention the PoE config function.. It seems, there is no other way, than please someone, who has the device, to check it from the device web interface.

L2 Switching Features•

• IGMP Snooping- IGMP Snooping- Supports 128 Groups

• Link Aggregation- Supports static link aggregation- Supports up to 4 aggregation groups, containing 4 ports per group

• Port Mirroring- One to One- Many to One

• Cable Test

• Loop Prevention

• PoE Auto Recovery

Link --> https://static.tp-link.com/2020/202007/20200717/TL-SG105PE(UN)1.0%20Datasheet.pdf

Can someone, please, check from the device's web interface?

Thanks!

@zbyndatvrd 

I've bought the device... Now, I can answer to myself :)

The switch does not support enable/disable PoE on a port. Pity.

@zbyndatvrd 

That is disappointing!    It's such a simple setting, one would imagine it's easy to implement!