Business Community > Controllers > Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
< Controllers

Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
2021-01-29 08:08:59 - last edited 2021-02-03 03:11:50
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.0.0 Build 20200930 Rel.36519

Hi,

I've added the new TL-R605 (instead of old 600vpn) on my lan.

Omada SDN (I use hw oc200 as controller) found it properly, (it's always conneced) but on dashboard I can see only my EAP access point.

IN order to see also TL-R605 I have to made every day the speed test.

After this test, the router is visible.

Is there a way to avoid repeating the speed test all the time and keep the tl-r605 visible in the dashboard?

Thanks in advance

Matteo

Before Speedtest

 

After speedtest

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN-Solution
2021-01-29 10:32:35 - last edited 2021-02-03 03:11:49

Dear @Matte,

 

Is there a way to avoid repeating the speed test all the time and keep the tl-r605 visible in the dashboard?

 

 

Try Periodic Speed Test under Site->Services: 

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
7 Reply
Re:Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN-Solution
2021-01-29 10:32:35 - last edited 2021-02-03 03:11:49

Dear @Matte,

 

Is there a way to avoid repeating the speed test all the time and keep the tl-r605 visible in the dashboard?

 

 

Try Periodic Speed Test under Site->Services: 

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
Re:Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
2021-01-29 13:14:12

DEar @Fae 

I found the checkbox on Site Service to activate the periodic speedtest.

Thanks again for your quickly support.

Matteo

  2  
  2  
#4
Options
Re:Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
2021-05-27 19:14:54
This doesn't seem to work for me using a TL-ER7206 running firmware 1.0.1. No matter how I try to run the speedtest, it fails.
  0  
  0  
#5
Options
Re:Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
2021-05-31 03:04:58

Dear @Hertog_Jan,

 

Hertog_Jan wrote

This doesn't seem to work for me using a TL-ER7206 running firmware 1.0.1. No matter how I try to run the speedtest, it fails.

 

Are you using Omada Software Controller or Omada Hardware Controller, what's the controller version?

 

Could you please elaborate on the speedtest failed issue? Some screenshots might be helpful.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#6
Options
Re:Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
2021-05-31 07:03:01

@Fae Thanks for the reply.

Fae wrote

Dear @Hertog_Jan,

 

Hertog_Jan wrote

This doesn't seem to work for me using a TL-ER7206 running firmware 1.0.1. No matter how I try to run the speedtest, it fails.

 

Are you using Omada Software Controller or Omada Hardware Controller, what's the controller version?

 

Could you please elaborate on the speedtest failed issue? Some screenshots might be helpful.

I'm using a C200 1.0 hardware controller, Controller Version: 4.3.5, Firmware Version: 1.8.0 Build 20210406 Rel.58757. The Gateway is a TL-ER7206 v1.0, running Firmware version 1.1.0 Build 20210512 Rel.48187.

 

I'm using the SFP+ port on the gateway, which connects using DHCP and a VLAN. The ethernet WAN port is diabled. Internet works reliably. 

 

I have tried manually running the speedtest, this results in an error:

 

I have also enabled the periodic speedtest, as some users reported success using that, but that hasn't had any effect for me.

 

  0  
  0  
#7
Options
Re:Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
2021-05-31 07:49:10

Dear @Hertog_Jan,

 

Hertog_Jan wrote

I'm using a C200 1.0 hardware controller, Controller Version: 4.3.5, Firmware Version: 1.8.0 Build 20210406 Rel.58757. The Gateway is a TL-ER7206 v1.0, running Firmware version 1.1.0 Build 20210512 Rel.48187.

 

I'm using the SFP+ port on the gateway, which connects using DHCP and a VLAN. The ethernet WAN port is diabled. Internet works reliably. 

 

I have tried manually running the speedtest, this results in an error: Test failed. Please try again.

 

To better assist you, I'd like to escalate your case to the TP-Link support team who could help you more efficiently.

They will reach you via your registered email address shortly, please pay attention to your email box later.

 

Once the issue is addressed or resolved, I'd encourage you to share it with the community. 

 

Thank you so much for your cooperation and support!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#8
Options
Re:Tl-r605 omada controlled properly connected but non visible on Dashboard Omada SDN
2021-05-31 17:56:28

@Matte TP-Link support did a remote session today, I was pleasantly surprised that they would even go through the trouble to figure out this issue. It seems to have something to do with the speedtest configuration/speedtest API. They changed some internals and were able to run a speedtest. They also reverted the changes and it is broken again. I hope they gathered enough data to fix it! :) 

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 1567

Replies: 7

Related Articles
Omada controlled ER605 (TL-R605) NAT Loopback support
4532 0
Omada Controller incompatible with TL-R605 Firmware
1304 0
TL-R605 Multi-Wan with Omada?
2915 0
TL-R605 v1.0 unable to add to Omada Controller (Not compatible)
3867 1
 TL-R605 Omada not compatible
1086 0
TL-R605 IPv6
1607 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.