TP-Link Community > Kasa Smart Plugs > HS 100 Overheating message
< Kasa Smart Plugs

HS 100 Overheating message

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS 100 Overheating message

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HS 100 Overheating message
HS 100 Overheating message
2020-01-05 14:46:44
Model: HS100  
Hardware Version: V2
Firmware Version: 1.5.8

Just over a year ago I bought two HS100s. One has been fine, the other has produced two overheating warnings in this time. The load on the first occasion was zero (it was simply plugged in to the wall socket) and the second time it was only 21Watts. Is there something wrong with it? Can it be sorted without returning/replacing?

Thanks.

  0      
 
  0      
 
#1
Options
2 Reply
Re:HS 100 Overheating message
2020-01-08 06:01:16

@alanlw 

 

Hello, please check the details below first. 

1. Whether the HS100 is poor contacted, such as partially loose.

 

2. Whether the pins contacted are rusty/have Impurities adhering to the contact surface.

 

And please tell me where and how do you connect this smart plug; the model number of the appliance and its power consumption is important as well.

 

Thanks a lot. Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:HS 100 Overheating message
2020-01-08 09:51:20

@Kevin_Z 

 

Thanks for your reply. This HS100 has been inside the house since we bought it. It has been more or less permanently connected to a UK wall socket since we bought it. It is not at all loose. There is no corrosion on the pins or other impurity. 

The model number is HS 100(UK) Version 2.1. As I stated the power load has been minimal, varying between 0 and 21watts.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1548

Replies: 2

Related Articles
HS 100 reconnect to WLAN
1042 0
TP Link HS 100 does not switch off power
304 0
Overheating error
722 0
smart plug HS 100(eu)
524 2
HS-100 no lights, no activity
1270 0
HS 100 and power consumtion....
1514 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.