Unable to access CCTV Decoder from client side

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to access CCTV Decoder from client side

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

mevalier

2019-04-11 04:46:01 - last edited 2019-04-11 07:19:38

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-04-11

Unable to access CCTV Decoder from client side

2019-04-11 04:46:01 - last edited 2019-04-11 07:19:38

Model: CPE210

Hardware Version: V3

Firmware Version:

Hi,

I need help on my setup as follow;

I have configured like this:

Router (GW 192.168.87.1/24) -> CPE210 (Access Point mode, IP: 192.168.87.50) -)))- CPE210 (Client Mode, IP: 192.168.87.55) -> CCTV Decoder (IP: 192.168.87.45).

My problem is, I cannot even ping all these IP from other subnet in my LAN, eg; from 192.168.86.0/24. My main priority is to access that CCTV Decoder. Please advice what is the correct way for me to implement this?

Thank you for your help.

1 Reply

R1D2

LV6

2019-04-14 20:08:55 - last edited 2019-04-14 20:09:28

Posts: 4334

Helpful: 1039

Solutions: 173

Stories: 3

Registered: 2015-12-05

Re:Unable to access CCTV Decoder from client side

2019-04-14 20:08:55 - last edited 2019-04-14 20:09:28

mevalier wrote

My problem is, I cannot even ping all these IP from other subnet in my LAN, eg; from 192.168.86.0/24. My main priority is to access that CCTV Decoder. Please advice what is the correct way for me to implement this?

You need to set up a network route into the 192.168.87/24 network in your 192.168.86/24 LAN and vice versa. Just add static routes on the router(s).

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻

Unable to access CCTV Decoder from client side

Unable to access CCTV Decoder from client side

Information

Voters 0

Tags