DHCP issue with TL-ER5120
Hardware Version :
Firmware Version :
ISP :
Hi,
I have recently deployed TP-ER5120 load balancer router in my office and since then once in a day all my notebooks are failed to get IP address from DHCP (configured on TL-ER5120) and it is fixed after 20 to 30 min's on it's own.
Please let me know if anyone has faced this issue or any fix for the same?
Thanks
Saurabh
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Suggested to reset your device and give it a try.
- Copy Link
- Report Inappropriate Content
Just deployed a TL-ER5120 to load balance two WAN connections on Tuesday. Encountered this issue since the isntall where the DHCP service stops after about 20-odd hours of router uptime. It stopped on Wed afternoon, rebooted the ER5120, and stopped again this afternoon. The only difference is that it does not come up again. Besides the DHCP service, the unit appears to work correctly.
The DHCP configuration is pretty much default, about 12 address reservation (2 are disabled). The DHCP server is only configured with a starting and ending address range and a lease time of 2880, and the status checkbox ticked.
Nothing in the log.
This is a V3 unit running 3.0.2 Build 20180125 Rel.35267
Robert
- Copy Link
- Report Inappropriate Content
We are Facing same Issue,
saurabh_gta wrote
Model :
Hardware Version :
Firmware Version :
ISP :
Hi,
I have recently deployed TP-ER5120 load balancer router in my office and since then once in a day all my notebooks are failed to get IP address from DHCP (configured on TL-ER5120) and it is fixed after 20 to 30 min's on it's own.
Please let me know if anyone has faced this issue or any fix for the same?
Thanks
Saurabh
- Copy Link
- Report Inappropriate Content
kashifnabeel wrote
We are Facing same Issue,
saurabh_gta wrote
Model :
Hardware Version :
Firmware Version :
ISP :
Hi,
I have recently deployed TP-ER5120 load balancer router in my office and since then once in a day all my notebooks are failed to get IP address from DHCP (configured on TL-ER5120) and it is fixed after 20 to 30 min's on it's own.
Please let me know if anyone has faced this issue or any fix for the same?
Thanks
Saurabh
Hi Saurabh
If you use ER5120 V3 as well, you can try to upgrade the latest firmware.
https://www.tp-link.com/en/support/download/tl-er5120/v3/#Firmware
- Copy Link
- Report Inappropriate Content
2020 and having the same issue... mine is version 1 and have upgrade the firmware - no luck.
Help ?
It's as old as SMTP.... how could it be a problem ???
:(
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2356
Replies: 5
Voters 0
No one has voted for it yet.