Model: TL-WA855RE Hardware Version: V5 Firmware Version: 231115 I Just installed the TL-WA855RE Extender on my LAN and connected it to the router. I Normally have 400 Mbps wireless Internet networks.

I have moved and reset my extender and entered new password. the extender is findable but reads "sorry wrong password". I have updated firmware and reset it three times and still get "sorr, wrong pass

Model is actually TL-WA1801 but model drop down wouldn't let me enter that. It's set up for access point mode and is working well but when I look at status on app or online it never shows a client hoo

I currently have the following hardware a. Xfinity ARRIS TG4482A v10 cable modem and Wi-Fi router WIFI 2.4 & 5.0 enabled SSID: ABC123! (for both 2.4 and 5.0) location: Downstairs b. tp-Link EAP225 v3

I have two RE315's acting as range extenders on the 2.4 GHz channels. The 5 GHz channels on both extenders is turned off. Both extenders are connected to a 2.4GHz main network. The connection to any 5

I am getting ready to alter my current setup as follows: I have a home router that I will connect to a TL-SG105E switch on port 1. I will set up MTU VLANS using port 1 as the up-link port. As I unders