@flunchie I really can't give you a direct answer, but from my experience only MODEM's have a splitout from the ISP's signal to an Internet and phone plug. There are modem/router combo's that can do...

@ajbl It is on your Router's GUI Advanced, Network, LAN page. A picture is worth 1,000 words: You will probably need to make the change and then you have 2 choices: Change the NAS back to match your...

@ajbl This is really a Netgear question, on how to change the IP address of the ReadyNAS. Googling this I find there are a few versions. One KB article from NG is...

@BasicUser Unless the Router has a Print Server in it the USB mefhod probably would not work. A few suggestions to try though. Run on the PC the HP Print and Scan Dr. It shouldn't find anything...

@grh1944 If you changed the MAC Address of the router to that of the PC, and the speed didn't match what you got out of the router, then it would appear to be a Router problem. Since you said you did...

grh1944 wrote @IrvSp I did as you requested and changed the mac and got the same thing. @grh1944 Same thing? Is that the slow speed or the same speed as a direct connect to the modem? If using Wifi...