Home Network Community > Wi-Fi Routers > Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
< Wi-Fi Routers

Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
2021-08-17 18:51:13
Model: Archer A10  
Hardware Version:
Firmware Version: latest download

My new Archer A7 router doesn't recognized the wired connection from a Netgear ReadyNAS Duo.  This NAS device connected with my prior Netgear router.

All my other devices connected easily to the A7 including an wired HP PC, and wireless HP laptop, cell phones, tablet, 2 TVs. 

  0      
 
  0      
 
#1
Options
7 Reply
Re:Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
2021-08-18 02:02:13

@ajbl 

 

You can check the IP address on the NAS, is it in the same IP subnet of the Archer A7? If it is using a static IP address, ensure it is 192.168.0.x (the default IP address of the A7 is 192.168.0.1), which can be within the DHCP address pool or outside it. If it is within the address pool, ensure that IP is not assigned to another device in the network.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
2021-08-18 18:28:57
The NAS has an IP address of 192.168.1.12. All the Archer A7 attached devices are in the 192.168.0.x subnet. This is likely the problem. How do I change the NAS address?
  0  
  0  
#3
Options
Re:Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
2021-08-18 18:46:35

@ajbl 

 

This is really a Netgear question, on how to change the IP address of the ReadyNAS.

 

Googling this I find there are a few versions. One KB article from NG is https://kb.netgear.com/29770/I-can-no-longer-access-my-ReadyNAS-OS-6-storage-system-after-moving-Local-Area-Network-LAN, and I'm sure there are others.

 

Might get better help asking in the NG Forums? The change has to be made in the ReadyNAS, unless you are willing to move all the other addresses you have to 192.168.1.x subnet by altering the IP Address of the router.

  3  
  3  
#5
Options
Re:Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
2021-08-20 18:26:19
If can't change the IP address of the router (since I can't access it), how would I change the IP range on the A7 router?
  0  
  0  
#6
Options
Re:Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
2021-08-20 18:32:28
Sorry, error in my prior reply. I meant to say I can't access the NAS device.
  0  
  0  
#7
Options
Re:Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
2021-08-20 20:49:55

@ajbl 

 

It is on your Router's GUI Advanced, Network, LAN page.

 

A picture is worth 1,000 words:

 

 

You will probably need to make the change and then you have 2 choices:

 

  1. Change the NAS back to match your old setup using 192.168.0.1 and then return the router to that IP Address.
  2. Change ALL other devices to use 192.168.1.1.
  0  
  0  
#8
Options
Re:Can't connect Netgear ReadyNAS Dou to my new Archer A7 AC1750
2021-08-24 21:49:14
Ok, I'm back to this issue. Not clear as how to change or override the router IP address. If I can move it to temporarily 192.168.1.1, then perhaps I could connect to the NAS device and reconfigure it to 192.168.0.1 . I can't access the NAS now so I can't change anything.
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 811

Replies: 7

Related Articles
 Can't connect
618 0
M5 - Can't Connect to mail.google.com
813 0
Can't connect new FireTV Cube to 6ghtz channel. Sees it but says out of range
1394 0
 New Netgear Nighthawk CM1200 Cable Modem
688 0
Echo Dot can't connect to WiFi
2168 0
 Deco 5000 fails to connect with netgear modum
192 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.