heathweatherLV1Online
Following: 0Followers: 2
Forums/ Kasa Smart Switches
2019-09-04 17:14:18
Re:HS200 cloud send cmd failed when trying to enable remote control
Following up in case someone else runs across this problem. Turns out the MAC address printed on the face of the HS200 did not match the electronic MAC address for the HS200. It took a few days,...
0HELPFULS
Forums/ Kasa Smart Switches
2019-08-23 23:16:11
Re:Re:HS200 cloud send cmd failed when trying to enable remote control
Email sent
0HELPFULS
Forums/ Kasa Smart Switches
2019-08-23 20:17:43
Re:HS200 cloud send cmd failed when trying to enable remote control
Also, I tried using a completely different network with the HS200, and still had the same issue. I've reset it 5-6 times now, it will not enable remote control.
0HELPFULS
Forums/ Kasa Smart Switches
2019-08-23 19:59:07
Re:Re:HS200 cloud send cmd failed when trying to enable remote control
Hi Tony, I set the address reservation outside of the DHCP range, removed the HS200 from the app, reset the HS200, went through the setup, and got the "Almost Done" screen, where it warns that I need...
0HELPFULS
Forums/ Kasa Smart Switches
2019-08-22 19:37:33
HS200 cloud send cmd failed when trying to enable remote control
I have several HS200 switches that are all working flawlessly, with one exception. One switch shows up in the app as "local only" , and when I go into options, and try to enable remote control, it...
0HELPFULS