@Zash The speeds being "up to" is the key when judging the performance. The real-world speed you finally get can be determined from a variety of factors. Sometimes it can be the computer, the port,...

@Slog If the Deco is set in AP Mode then it doesn't have any control over the routing so I would start with what the main Deco is wired to. You could also disconnect the Deco and plug that same...

@Ziure916 I believe you may be talking about our cable modem/routers such as the Archer CR700? In any case, no they do not support MoCA.

@blackattack3 Wire your computer directly to the CPE, and assign a static IP to the computer such as: IP: 192.168.0.10 Subnet: 255.255.255.0 Once connected to the CPE, open your browser and try the...

@ThomasM If your device randomly loses power, and if the wiring still looks good, then the device may be having an issue. I would reach out to our support team at that point: link

@k00lrunningz Thank you for the compliment and feature requests. We will forward those for consideration to our devs.