Forums/
Deco
2024-10-04 09:02:40
@Spandox You observe that on several meshes with several models of Deco? I would try setting up an IoT wifi network on the Deco, perhaps with only 2.4, or with reduced security, and connect the smart...
0HELPFULS
Forums/
Deco
2024-10-04 08:44:14
@NJRonbo Regarding backhaul. I take it there is a "bridge mode" or "AP" setting in the app that tells the two (of three) nodes they are connected? Do I have to designate a band I want the backhaul to...
0HELPFULS
Forums/
Deco
2024-10-04 08:32:01
@NJRonbo As you intend to connect two Deco by Ethernet to the ISP router, you must run the Deco mesh with an Operation Mode = Access Point. Indeed, when the Operation Mode = Router, one Ethernet port...
0HELPFULS
Forums/
Deco
2024-10-03 09:33:58
@rotodisc I do not believe those are actual "errors". There are routine events. . If you give the MAC and IP address of your hardwired computer, we could analyse the events related to it. . I am...
0HELPFULS
Forums/
Deco
2024-10-02 14:52:46
@Myscreenname123 The Deco app shows that a satellite Deco is connected by Ethernet to the main Deco, even if the satellite is connected by wifi to the main Deco? Does that persist when you unplug the...
0HELPFULS
Forums/
Deco
2024-10-02 14:43:43
@paullpaul You have a radio unit connect by Ethernet to a Deco. You see that device as a client in the iPhone Deco app. From where do you have access to the web interface of the radio device? Where...
0HELPFULS