I am looking to move my smartplugs to a private Wifi network, which is blocked from accessing the Internet. The plan is to use it locally from Home Assistant. I created a separate SSID for this...

@Riley_S , FYI, I rebooted all my APs seconds apart earlier today as a test. All the KP125 smartplugs came back online properly. It looks like the new settings on the separate SSID may have helped....

@Riley_S It takes much less than 10 minutes for the APs to come back up. A normal reboot takes about 90 seconds. For AP firmware updates, I have seen them be offline as long as 7 minutes (looking at...

@Riley_S When the Kasa devices go offline, they show as being offline in the Kasa app, not under local control. I can't ping their static IP address. If we were talking a straight incompatibility,...

BTW, just did a very simple test : 1. disabled the SSID to which the smartplugs were connected on all 6 Unifi NanoHD APs 2. waited a minute or so 3. enabled that SSID on my XB7 gateway/router Now,...

@Riley_S All my smartplugs are already using static IPs, more accurately, static DHCP reservations in my router, which is a Comcast XB7. The issue didn't only happen while the firmware was being...