How to install H200 with power into light

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to install H200 with power into light

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

sangyum

2017-07-04 06:38:40

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2017-07-04

How to install H200 with power into light

2017-07-04 06:38:40

Model : HS200

Hardware Version :

Firmware Version :

ISP : Spectrum

Can someone explain how to install HS200 when the power goes into the light, like shown below

In another word, I have only three wires to connect, instead of four as the installation guide assumes.

Thanks!

1 Reply

MikeP_Automati

LV3

2017-07-04 21:37:34

Posts: 249

Helpful: 31

Solutions: 1

Stories: 0

Registered: 2017-03-07

Re:How to install H200 with power into light

2017-07-04 21:37:34

You cannot do it safely, neutral is required. If you have one available, power in comes from the white/black stripe and is switched by the HS200 out through the black. The HS200 white needs to be connected to the neutral.

sangyum

2017-07-04 06:38:40

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2017-07-04

Information

Helpful: 0

Replies: 1

How to install H200 with power into light

How to install H200 with power into light

Information

Voters 0

Tags