Smart Home Community > All Threads > KC410S standby power consumption
< All Threads

KC410S standby power consumption

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

KC410S standby power consumption

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
KC410S standby power consumption
KC410S standby power consumption
2023-02-08 18:46:51 - last edited 2023-02-15 19:58:14
Tags: #Feature Request #Power consumption
Model: Kasa KC410S  
Hardware Version: V1
Firmware Version: 2.3.14

Hello,

 

I have been comparing power consumption of the different switches and cameras in standby and this is what i got

 

Single outlet switch (KP100):  0.6w w/h

3 outlet power strip (KP300):  0.43w w/h

5 outlet power strip: (HS300): 0.45w w/h

Security camera (KC410s)): 1.44 w/

 

As you can see security camera on standby (meaning it is set as power off in the app, not recording) is using way more electricity than a power strip.

 

Taking into consideration that in standby all devices should just bee having wifi on, why is the security camera (when powered off) spending 3 times more energy than other TP link devices?

  0      
 
  0      
 
#1
Options
3 Reply
Re:KC410S standby power consumption
2023-02-09 17:57:36

  @uri200,

So the Specifications for the KC410S does not actually include a standby power specification, I would assume that this means that there was no designed standby mode for the camera

 

As a result, it is impossible to actually put the device into a standby mode, rather you are simply disabling the sensors and cameras. The network connection will still remain active and is most likely the source of the increased power draw.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  1  
  1  
#2
Options
Re:KC410S standby power consumption
2023-02-09 18:04:19 - last edited 2023-02-09 18:05:30

  @Riley_S thanks for the reply.

 

That is right. I was doing the test with the camera enabled too and it was using the same power . So the turn of button only disables the camera functions , but it does not put the camera in standby.

 

It would be good to consider that functionality for future hardware releases. If you have multiple cameras , this starts to add up quickly.

 

Note that one of the good things from other kasa devices is the low consumption they have on standby.

 

 

  0  
  0  
#3
Options
Re:KC410S standby power consumption
2023-02-09 21:36:38

  @uri200 really help full one

  1  
  1  
#4
Options

Information

Helpful: 0

Views: 857

Replies: 3

Tags

Feature Request
Power consumption
Related Articles
KC410S Not recoding when SD card is full
597 0
recording power consumption
661 0
KP100 power consumption
1064 0
Standby Power Draw, & Can it run a Program?
288 0
Only want power consumption times
394 0
KP115 - Runtime statistics and Power consumption all stuck at zero
745 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.