Smart Home Community > All Threads > Using HS200 to control 2 devices not wired to switch
< All Threads

Using HS200 to control 2 devices not wired to switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using HS200 to control 2 devices not wired to switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using HS200 to control 2 devices not wired to switch
Using HS200 to control 2 devices not wired to switch
2020-11-16 01:17:45
Model: HS200  
Hardware Version: V3
Firmware Version: 1.1.3

Is it possible to provide power to the HS200 through one circuit and use the paddle to turn off/on two TP-Link bulbs on another circuit? I can't find any information about changing the paddle's programming to control multiple devices not in-line with the switch.

 

Thanks!

  0      
 
  0      
 
#1
Options
1 Reply
Re:Using HS200 to control 2 devices not wired to switch
2020-11-17 17:54:29

@RussellHobbs 

 

You wouldn't need to wire anything. You will set up smart actions that will control the smart TP-Link bulbs: https://www.tp-link.com/us/support/faq/2567/

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 621

Replies: 1

Related Articles
HS200 to control electrical outlet
1035 0
Lights flickering using HS200 switch
1237 1
hs200 control another hs200?
1005 0
2-gang wall plate for HS200
58919 17
HS200 Wired Up, but not working
631 0
Can a HS200 control a hardwired lamp in the same room but not wired to said switch?
591 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.