Wired exactly like old switch. Lights click on and off very fast. Tried two different switches.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi I wired this up exactly as how my old switch was but they are not working. If I put the old switch back on it works no problem. Each switch is individually wired. There are two other switches that need to be on for these switches so what I'm learning is that this is a three way switch? However the hs210 switch has connections for two travelers. Do I just install one since I only have one? Do I for certain need the hs210? In the picture is the reinstalled old switch working fine in the background. In the foreground is the smart switch connected but not working. I ended up just putting both old switches back in to have lights on for now.
Thanks for any help!
Thanks for the reply! Okay I will order a couple of the hs210 and use these other two elsewhere in the house. I'm not sure I understand completely. There is a red a black a white and a ground. I asummed the white was neutral, black hot and red traveler. The switches are not wired together. I took a picture of earlier but its all put back together now with the old switches. But it gives you an idea of what I'm talking about. If white is neutral and black load, can't that just leave red as the traveler? The old switches were wired with the black and white on the connections labeled common and the red wire was unlabeled on this switch. Recently purchased house just getting my toes wet with electrical trying to learn as much as I can. Maybe the picture will help. Thanks so much for the info!
