Smart Home Community > All Threads > Using the wall switch with Kasa lightbulbs
< All Threads

Using the wall switch with Kasa lightbulbs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using the wall switch with Kasa lightbulbs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using the wall switch with Kasa lightbulbs
Using the wall switch with Kasa lightbulbs
2019-12-10 05:12:16
Model: KL110  
Hardware Version: V1
Firmware Version:

I have installed 4 Kasa smart lightbulbs into a ceiling fixture. My main purpose is to be able to dim the light and control the light when we are out of town. My family and I will most likely continue to use the wall switch to turn the light on and off as opposed to using my mobile phone or Alexa. The problem is every time the light switch is turned off the lightbulbs become unresponse in both the app and with Alexia. There is no possible way I can continue to reset all four lightbulbs every day. Is this correct or will the lightbulbs reset themselves? 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Using the wall switch with Kasa lightbulbs
2019-12-10 23:56:47

@Mandamomma 

 

When you flip the switch to off you are cutting power to the bulbs.  When power is cut the product and its connection to the wifi are lost.  This is why you are unable to get the products to respond to the app or voice through Alexa.  Just as if the bubls were plugged into a lamp you must maintain the flow of power to the device for it to remain on and connected to the internet.  Even if the bulb is phyically off it is still drawing enough power to keep its wifi module and connection the cloud server up and operational.  So the solution is to stop using the switch and control the lights via your app/widget or voice assistant. 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#2
Options
Re:Using the wall switch with Kasa lightbulbs
2019-12-11 01:01:06

@Carl "Even if the bulb is phyically off it is still drawing enough power to keep its wifi module and connection the cloud server up and operational."

 

I was hoping that was true. That makes it sound that if you flip the light switch back on everything should be fine. But it's not. I have to reconnect the lightbulbs each time the switch is flipped to get them to work. 
 

Training a family of 7 to not use the switch is difficult. I guess I'll have to tape the switch to the on position or return the bulbs. 

  0  
  0  
#3
Options
Re:Using the wall switch with Kasa lightbulbs
2019-12-11 18:05:33

@Mandamomma 

 

 

By phyiscally off I mean as the light is not on.  The power flow still needs to be there though so the switch would need to remain in the on postion for the bulb's wifi and cloud features to remain active.  Sorry if i confused you there. 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1246

Replies: 3

Related Articles
Using a smart switch with smart lightbulbs that have no wiring to a switch
1879 0
Kasa Wall Switch to Control Kasa Bulbs
288 0
HS200 Wall Switch
775 0
Kasa Smart Switch Wall PLates
268 0
Wall Switch for Kasa Smart Plugs, No Wiring
529 0
Fan speed wall switch is needed in the KASA family
1594 8
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.