Home Network Community > Deco > "satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul
< Deco

"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul

"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul

"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul
"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul
3 weeks ago - last edited 3 weeks ago
Tags: #Backhaul Method
Model: Deco BE63  
Hardware Version: V2
Firmware Version: 1.0.6 Build 20240724 Rel. 12326

Brand new Deco BE63 goes offline as soon as ethernet backhaul is plugged in. Will come back online if unplugged. 

 

A few important notes:

Wifi router mode. Not interested in AP mode. 

Different ports and cords tested. Same result. 

Modem/internet is ATT Fiber BGS320-500. Limited config on that but using IP passthrough and mapped to main Deco unit. Static IP, subnet mask, DNS set within deco app "internet connection". 

 

Any config ideas?

 

TP link advanced tech support is legit only available during overnight hours to troubleshoot and haven't been able to get it scheduled. 

  0      
 
  0      
 
#1
Options
5 Reply
Re:"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul
3 weeks ago

  @johns904 Does that occur when the satellite is directly plugged into the main Deco?

  0  
  0  
#2
Options
Re:"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul
3 weeks ago

  @yves_b yes

  0  
  0  
#3
Options
Re:"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul
2 weeks ago
My new pair of BE95s do the same thing, except the satellite device connects and goes offline continuously. It's up for a couple minutes, then down, then up - goes on forever.
  1  
  1  
#4
Options
Re:"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul
2 weeks ago

  @AndyO I spent a while on with their support last night (unfortunately they are 12 hours away from Eastern time zone) but they were able to determine that it's not a port issue on the unit. So I'm guessing firmware/software. I'll let you know if they uncover anything. For now I'm stuck using wireless backhaul only. 

  0  
  0  
#5
Options
Re:"satellite" deco goes offline (& red LED) with ethernet backhaul - works only with wireless backhaul
2 weeks ago - last edited 2 weeks ago

  @johns904 

 

The same issue came in my x55pro&x55 network with last official over the air update (1.4.1/1.5.5) firmware, so I have found more recent firmware (1.4.4./1.6)at this forum that can be installed only manually and problem is gone. I suppose firmware downgrade may work also if this is the case.fde1af543be24db49940a8bf58fb1218

  1  
  1  
#6
Options

Information

Helpful: 0

Views: 217

Replies: 5

Tags

Backhaul Method
Related Articles
 Backhaul to Satellite goes to Wifi, and then main deco turns red when disconnecting to switch
154 0
 Deco X60 - LED Goes RED When LAN Connected to PC
147 0
AXE5300 Goes offline (solid red) since 6/3 consistently
899 0
Deco goes offline when reolink camera nvr system is connected
1616 0
 Deco m4 red led
504 0
 Deco X20 Satellite deco blinking red
3069 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.