Network Switch

Network Switch

Network Switch
Network Switch
a week ago - last edited a week ago

Is there a Network Switch that will handle both Deco PoE (X50 Outdoor) and non-PoE (BE85s) access points so I can easily wire backhaul them together. And also can handle PoE cameras? I assume it would need to be at least a 24 port switch. Thanks

  0      
  0      
#1
Options
1 Accepted Solution
Re:Network Switch-Solution
a week ago - last edited a week ago

  @GR1 You can, indeed, connect devices to ports of a Deco.

Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:Network Switch
a week ago

  @GR1 

If you want to have a single switch, you could perhaps use a TL-SG2428P.

You could also use several smaller switches.

  0  
  0  
#2
Options
Re:Network Switch
a week ago

  @yves_b 

Thank You So Much. 

I will look into this switch so all access points can be attached to one switch as wired backhaul. Will attach it to the 10G port on  BE85 Router. 

I should be able to hook up my NVR or NAS to the other available 2.5G ports on the same router correct or another switch if needed?

Thank You

I know I will only get < 1G since Starlink dish cable is a cat5e.

  0  
  0  
#3
Options
Re:Network Switch-Solution
a week ago - last edited a week ago

  @GR1 You can, indeed, connect devices to ports of a Deco.

Recommended Solution
  0  
  0  
#4
Options
Re:Network Switch
a week ago
Thank You. Have a great 👻
  0  
  0  
#5
Options