Model HS100 says "Local Only". How do I change It.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Model HS100 says "Local Only". How do I change It.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Chuck399

2022-07-07 16:11:33

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-07-07

Model HS100 says "Local Only". How do I change It.

2022-07-07 16:11:33

Model: HS100

Hardware Version: V1

Firmware Version: 1.2.6

How do I change "Local Only"?

1 Reply

Riley_S

2022-07-11 22:40:09

Posts: 3009

Helpful: 888

Solutions: 117

Stories: 39

Registered: 2022-04-18

Re:Model HS100 says "Local Only". How do I change It.

2022-07-11 22:40:09

@Chuck399,

Your Device is Showing Local Only Because it has become either disconnected from the network or from the cloud services. For this reason, you can often still adjust and control your device when on the same network as the smart plug.

If you would like to reconnect the plug to the network, you may perform a soft reset of the plug by holding the button for 5 seconds, this will not erase the settings, but will reset the network settings for the device. At this point, you should be able to reconnect the device to the network through the app.

More Information Regarding the Different Types of Resets Available for Smart Plugs can be found here:

Resetting a Plug - Soft and Factory Resets

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells

Model HS100 says "Local Only". How do I change It.

Model HS100 says "Local Only". How do I change It.

Information

Voters 0

Tags