Kasa 3 Way Dimmer - Orange Light Stays On!
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Kasa 3 Way Dimmer - Orange Light Stays On!
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
K230 Kit 3 Way Dimmer - Installed all wires correctly on main and satellite switches, however getting steady orange light on main switch. Does not blink orange/green to connect with wireless internet in house. Checked continuity of each wire. All good. How can I upgrade firmware if I can't connect to switch? How can I resolve steady orange light. Connected exactly as outlined in Kasa App for 3 Way Dimmer Switch.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello everyone,
If KS230 3-way dimmer has Orange Led, please try to factory reset th KS230 main switch and see if the WiFi led flash amber and green
- Try to factory reset KS230 as User Guide by pressing RESET button on the left bottom of main KS230
Press and hold (about 10 seconds) until the status LED blinks amber rapidly to factory reset the3-way dimmer kit.
If the concern persists, please reach our local customer service to get help or start the RMA process
1. the photo of wiring of KS230KIT (note the Main and Satellite switch)
2. the photo of wiring of Old- 3 way Kit if you kept any of that
3. the LED status on KS230KIT (Wi-Fi Led on the main KS230 , Ring or White circle Led on main & satellite KS230 )
Did you try factory reset on main KS230
4. When and where did you purchase the device, product SN number.
Note: this thread will be marked as' solution' to let users with the same concern found the information in full and provide additional feedback.
Thank you for your understanding
- Copy Link
- Report Inappropriate Content
Hello everyone,
If KS230 3-way dimmer has Orange Led, please try to factory reset th KS230 main switch and see if the WiFi led flash amber and green
- Try to factory reset KS230 as User Guide by pressing RESET button on the left bottom of main KS230
Press and hold (about 10 seconds) until the status LED blinks amber rapidly to factory reset the3-way dimmer kit.
If the concern persists, please reach our local customer service to get help or start the RMA process
1. the photo of wiring of KS230KIT (note the Main and Satellite switch)
2. the photo of wiring of Old- 3 way Kit if you kept any of that
3. the LED status on KS230KIT (Wi-Fi Led on the main KS230 , Ring or White circle Led on main & satellite KS230 )
Did you try factory reset on main KS230
4. When and where did you purchase the device, product SN number.
Note: this thread will be marked as' solution' to let users with the same concern found the information in full and provide additional feedback.
Thank you for your understanding
- Copy Link
- Report Inappropriate Content
@EdgarP Did you get this resolved? I'm having same issue. Thx!
- Copy Link
- Report Inappropriate Content
I am facing the same issue , orange light stays on reset didn't work. Did you get it resolved
- Copy Link
- Report Inappropriate Content
no, I gave up for now. I may return the switch for another.
- Copy Link
- Report Inappropriate Content
I got a replacement and it's working fine. But I have another issue where if I am trying to dim my kitchen cabinet light less than 100% the light is flicker
- Copy Link
- Report Inappropriate Content
my KS230 flickering issue while dimming is fixed after downgrading the firmware version to 1.0.10. My current version was 1.0.12 which was buggy.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @MrShizzle
I noticed you have created a support email, our support will follow up your caseTKID220227522
If you have tried a factory reset, can you share the 1) wiring of main & Satellite KS230 2) could you manually turn on/ off KS230 kit on that support email, thank you.
- Copy Link
- Report Inappropriate Content
wiring is per paper instructions included with kit line - traveler 1 - traveler 2 - ground - neutral for main
then load - traveler / traveler / ground for companion.
it was all working for about 5-10 minutes while I did initial install. Then I closed walls up put plates on while power was off and when I turned power back on it was solid orange.
this is all in brand new wiring from a new install.
i am wondering if a firmware update has bricked the device as I'm reading a lot of complaints about that. This is the 3rd kit device that has done this to me.
- Copy Link
- Report Inappropriate Content
I also have this issue. Switch worked fine for a few days then this happened. No resets help and there is no WiFi broadcast from the switch, so I can't do anything that way either. I installed 3 kits, the other 2 kits are working ok. Support reached out to me with suggestions, but non helped and they have been silent for 2 months now. I would like the switch replaced as it cost me over $50 for the kit. Every other switch in my house works fine. I have already ordered a new kit as my wife is upset about this one switch not working.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 7492
Replies: 15
Voters 0
No one has voted for it yet.