KL430 Reboot Loop and Unresponsive Device
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am experiencing a constant reboot loop similar to this issue: https://community.tp-link.com/us/smart-home/forum/topic/242590. I have tested with a /24 subnet and the issue still occurs. The device enters a constant ~1min reboot loop and is only responsive for a few seconds after each reboot. I assume this is related to some sort of connectivity issue, but I have been unable to isolate it. Also, the device cannot be factory reset as long as the WiFi network is present,
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello everyone,
If you met the same concern with KL430 reboot loop, please check solution & solution in thread below:
[Solution] KL430 V2 Reboot Loop Fixed
Feel free to leave your comment in the above thread, thank you.
- Copy Link
- Report Inappropriate Content
Hey @Mark-in-OC ,
Thank you for your valuable feedback, we have a beta firmware that worth a try, please check my private message.
- Copy Link
- Report Inappropriate Content
Hello@Mark-in-OC , thank you for let us know the beta help with the issue! Feel free to let us know for anything new.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi Mark @Mark-in-OC ,
Currently, I did not have KL110 firmware, can you help describe the KL110 phenomenon, one old known issue for KL110 is [Solution] Kasa devices reboot randomly and been fixed in new firmware, but not reboot loop issue. Did you try a factory reset on the bulb before, as when you factory reset and reinstall it , app will normally do a firmware at the end of the setup process.
(How to reset kasa smart bulb, bulb will flash several times after a successful factory reset) https://www.tp-link.com/support/faq/2660/
- Copy Link
- Report Inappropriate Content
@Solla-topee I have reset the device, but they are unable to stay on the network long enough to update the firmware.
- Copy Link
- Report Inappropriate Content
Hello @Mark-in-OC
Try to connect bulb to a 2.4Ghz hotspot Wi-Fi and see if that helps. May I know could bulb finish the set up in the APP after factory reset?
By the way, can you help describe how did you find out KL110 run into a reboot loop, thank you
- Copy Link
- Report Inappropriate Content
@Solla-topee hi, I'm experiencing this same reboot loop with the kl430. Is it possible to get a copy of this new firmware?
- Copy Link
- Report Inappropriate Content
Hello everyone,
If you met the same concern with KL430 reboot loop, please check solution & solution in thread below:
[Solution] KL430 V2 Reboot Loop Fixed
Feel free to leave your comment in the above thread, thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1896
Replies: 8
Voters 0
No one has voted for it yet.