Request: HS220 dimmer calibration - please include an adjustable MAX brightness
I have found that my dimmer switches, all of the 3 i have installed, cause my LED bulbs to flicker ONCE as they ramp up to 100%. if i set them to 98%, they do not. i am positive that it is not a wiring or bulb issue (persay)... as you already have given us the ability to set a lower limit, please add an upper limit, which would fix my issue completely. i have read on the forums other people with the same issue, and i suspect this would fix their issues as well
thanks!
adam
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Adjustable max brightness limit setting in app would resolve issue. Running one HS220 controlling 4 lights (combination of LED/Incandescent). As long as maximum brightness is not set above 94% lights will not flicker, and I have full functionality of dimming from switch and Alexa. Strongly consider adding this feature in future update!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Dimwitted Does this mean that if we reverse the wiring on the LED's it might stop doing this?
- Copy Link
- Report Inappropriate Content
I have 2 KS230 3-way's installed each with 8 LED's. They do not blink on the highest setting. I have a third 3-way also with 8 LED's and they do blink only on the highest setting.
Help.
- Copy Link
- Report Inappropriate Content
I mostly use Alexa routines to turn lights on and off at certain times of the day, with motion, or in groups. In all cases I set the brightness to 98% or less to avoid the blink on some bulbs around the house. I also set the highest preset in the Kasa/Tapo apps to 98%. This keeps the lights from doing a blink at 100% most of the time, but not when physically using the switch. TP-Link, why not add a max setting during calibration?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 31
Views: 4451
Replies: 35
Voters 20
