HS210 - 3 Ways
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Why are the HS210's called three ways? The description says controls 1 or 2 locations. I have a couple of lights that have 3 switches to them, so which smart switch do I use for that?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@tward1 OK that make sense.The power and the neutral are at the light fixture.
Power is coming in on #1 black, goes to the other switch via the travelers(#2red/black), then comes back on the white wire, connects to the #1white wire which goes to the bulb.
- Copy Link
- Report Inappropriate Content
@B.Will How do I connect the HS210 in this situation?
- Copy Link
- Report Inappropriate Content
@tward1 You don't have a neutral in picture 1, if you have a neutral in picture 2 that may work.
- Copy Link
- Report Inappropriate Content
@B.Will I believe there are neutral wires in #2 but they aren't from that swtich they are from another switch that is in there as well, would that work?
- Copy Link
- Report Inappropriate Content
@tward1 Neutral wire is never connected to a dumb switch.
If it is a group of white wires on there own then that is good to use.
- Copy Link
- Report Inappropriate Content
@B.Will Thanks for all the help once again, connected it to the other switch and it is working fine now.
- Copy Link
- Report Inappropriate Content
@tward1 Your Welcome, glad to be of help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3145
Replies: 27
Voters 0
No one has voted for it yet.