Using HS200 to control 2 devices not wired to switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using HS200 to control 2 devices not wired to switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RussellHobbs

2020-11-16 01:17:45

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-11-16

Using HS200 to control 2 devices not wired to switch

2020-11-16 01:17:45

Model: HS200

Hardware Version: V3

Firmware Version: 1.1.3

Is it possible to provide power to the HS200 through one circuit and use the paddle to turn off/on two TP-Link bulbs on another circuit? I can't find any information about changing the paddle's programming to control multiple devices not in-line with the switch.

Thanks!

1 Reply

Tony

2020-11-17 17:54:29

Posts: 6306

Helpful: 1588

Solutions: 165

Stories: 41

Registered: 2018-11-06

Re:Using HS200 to control 2 devices not wired to switch

2020-11-17 17:54:29

@RussellHobbs

You wouldn't need to wire anything. You will set up smart actions that will control the smart TP-Link bulbs: https://www.tp-link.com/us/support/faq/2567/

Using HS200 to control 2 devices not wired to switch

Using HS200 to control 2 devices not wired to switch

Information

Voters 0

Tags