3-way switch issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

3-way switch issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
3-way switch issue
3-way switch issue
2020-04-23 11:25:54 - last edited 2020-04-23 11:36:08
Model: HS210  
Hardware Version:
Firmware Version:

HI Guys

 

I installed the 2 HS210 and I am running into the following issue:

 

Turn the switch that has wifi light showig on switch on, the light turns on. Turn the same switch off, the light turns off. However now If I try and turn the other switch on, the light does not turn on. 

It seems that 1 switch is acting as 'master' and only turns the light and the other light switch when turned on. 

 

Attached are the wiring images for the 2 swithces. Any help on how to fix this will be greatly appreciated.

 

Thanks

 

 

 

  0      
  0      
#1
Options
5 Reply
Re:3-way switch issue
2020-04-23 17:08:24

@TK_1315 

 

 

Hi TK

 

Just based on the picutres it looks like you have the wires crossed.  Try changing the wires on the bottom Red and Black on unit and putting them in the opposite posistion.  Let us know what that does. 

  0  
  0  
#2
Options
Re:3-way switch issue
2020-04-30 18:52:26

I hope you got it working.  I had a similar issue when installing a HS210... it turned out to be a bad switch.  Hopefully that is not the case for you.

 

Ryan

 

  0  
  0  
#3
Options
Re:3-way switch issue
2021-02-02 15:15:20

@RyanEverhart789 did you buy yours at Amazon? I think I got your returned units :-(, because the one switch only controls lights when the other one is ON.

RyanEverhart789 wrote

I hope you got it working.  I had a similar issue when installing a HS210... it turned out to be a bad switch.  Hopefully that is not the case for you.

 

Ryan

 

 

  0  
  0  
#4
Options
Re:3-way switch issue
2021-02-02 15:16:12
Did reversing wires helped?
  0  
  0  
#5
Options
Re:3-way switch issue
2021-02-02 15:25:42

@sychev Sorry about that. 

  0  
  0  
#6
Options