2-gang wall plate for HS200
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have multiple locations where one HS200 switch is installed next to another one. The wall plate that comes with the switch is single gang.
I have tried the usual Decora screwless 2-gang wall plate but these switches pop out of the wall much further than normal switches so standard plates do not work. There is a large gap between the plate and the wall.
Is there a 2-gang plate available similar to the single-gang one that comes with the switch?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Just wanted to say thank you for the great suggestion! I installed the HS220 , 3 of them and I am super happy with the outcome
Here is a pic so others can see how it looks like with 3 gang HS220
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@SatzNalla Go to page 1. Look in the comments. The links are there for Amazon.
- Copy Link
- Report Inappropriate Content
I got those, but not installed yet, see next.
To check, when I put the switch into the plate, the switch screw area still protudes compared to the back of the plate, meaning I would have a gap between the wall and the plate. Is your plate flush with the wall? Is the switch screw area going into the wall?
Before I install all my swicthes I want to make sure I can finish the job cleanly.
Would be great for TP-Link to make those 2 and 3-gang plates as it's a common need, and we would not have to deal with hacks.
- Copy Link
- Report Inappropriate Content
@KasaUser005 great post!! Did you purchase the mid size or standard plates? I noticed the links gave me the option of both. Thanks again!
- Copy Link
- Report Inappropriate Content
@Jo-pa I purchased the medium sized plates. Turned out great!
- Copy Link
- Report Inappropriate Content
@KasaUser005 awesome thank you! I have some of the regular single pole Kasa switches too, I am hopeful these will fit them as well. Thanks!!
- Copy Link
- Report Inappropriate Content
@Jo-pa They will. I did the same thing.
- Copy Link
- Report Inappropriate Content
@KasaUser005 thanks again! Great post!
- Copy Link
- Report Inappropriate Content
Thanks. I will give these a try as the last alternative to use in 2/3 gang switches. I bought all Leviton Decora and they will not work. If the ones you recommend do not work I will be shipping all 25 Kasa switches back. Just unbelievable that Kasa does not have a solution for this very common application.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 16
Views: 56883
Replies: 53
Voters 7
