@Cmcsr03 

On the old switch you had two black wires on one screw.

Those two black wires should connect to one of the black wire on the HS200.

On the old switch you had one black wire going to the other screw.

That black wire should go to the other black wire on the HS200.

And it looks like you have the HS200 white and green connected correctly.

@B.Will Thanks for responding.  On the old switch, there were two black wires going straight into the back of the switch - one at the top and one at the bottom and the hoop connected to the side with a screw. I ended up connecting one black wire to the top black wire and the other black wire I wrapped around the source wire and secured with electrical tape and that worked so I'm good to go now. .