3 way Dimmer switch?
Does TP-Link have any plans in the near future to release a 3-way dimmer switch? I have the HS200 and HS220. I would love it if the HS220 had the 3Way capability.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @DEcosse,
I wasn't clear. I meant automatically on a reply. I'm on a Jeep forum that adds the quote automatically EVERY time you reply which clutters things up quickly unless you just do a simple post or remember to delete or edit the quote.
- Copy Link
- Report Inappropriate Content
So I attempted the KS230KIT install. I have multiple other TP-Link switches and I have 1 other 3way TP link.
for whatever reason I cannot get it to flash orange and green. It stays orange and after a bit will flash off and back to orange.
Yes I have seen other people post that on this community, yes I validated my wiring was/is correct, no the reset didn't fix it.
Now I am attempting to return it from the buyer on Amazon but I'm a bit worried they won't actually let me return it.
- Copy Link
- Report Inappropriate Content
I did a chat with Amazon about returning past the return window and they said 1 time exception. They sent me a return email, It says refund of $35.35. I'm not sure if they dinged me on return shipping or late return.
- Copy Link
- Report Inappropriate Content
Well I attempted to finally install these today. During the first boot up it did the light calibration and the lights actually did that stupid dim test. Then the first time they came on to 100% they dimmed all the way back down to off as expected with the old firmware.
It eventually prompted to do the firmware update which I allowed it to do, now the lights don't come on at all but I can still control the led indicator on the switch. The satellite switch ended up giving off a foul odor but still seems to operate without actually turning on the lights though. I figure it's still operating in some capacity because if I flip the switch it changes the main... but still no lights ever come on. Looks like I'll be installing the old ones back and hopefully there is some type of RMA for a new hardware version because this sucks the sweat off a dead mans basket.
- Copy Link
- Report Inappropriate Content
I have been following this thread since day 1 and also posted about the dummy switch solution that worked so so for me until now.
ALL my house has only Tp-Link switches so I wanted to share my experience.
All in all I bought 3 Dimmer switches. One in the first week and two more 1 months ago.
Since I was in the middle of a renovation I waited until this week before installing all 3.
All the switches had the same dimming issue after turning on with the default firmware but after updating the firmware they all operate as expected!!
The only problem I noticed is that 1 of the 3 satellites has no led light indicator at all (I read other ppl faces the same issue).
@Carl what should I do about that?
Few other thing that I saw ppl here in the forum complain and I wanted to share my experience.
1. Led light - I did not see much difference between the led lights of the switches. I have 2 KS230 satellites with one simple non dimming switch and seems they have the same led (well, atleast the one who works out of the 2).
However after more investigation as I have 4 gang with TP-Link HS220 switches I noticed that one of them has different led light. I check the hardware of the 4 switches. 3 are on HW version 3.0 and one older on HW version 1.0. The one that on 1.0 has different led. So I guess the different led light issue that ppl here face might be related to that and it is not unique problem to the KS230.
2. There is no dimming indication on the satellites as ppl have already mentioned.
3. I don't use the double click option so I can't comment on that.
I attach 2 pictures.
In one you can see 3 gang with 3 switches. Two KS230 satellites (the middle one is with the broken LED light) and the left one is regular switch. I couldn't tell the difference in the led light.
In the second one you can see the 4 gang with 4 HS220 dimmers switches.
- Copy Link
- Report Inappropriate Content
Hi @KazaUser,
Looks like you hit all the issues. It's interesting that your indicator LEDs are different intensities on different hardware versions of the same switch model. Hopefully, TP-LInk will do the same to resolve the same issue with the v1 hardware on the KS230 remotes. It's not a huge deal, but it's sloppy and annoying and it would have been nice if the engineers could have just told us this. The lack of an on/off indicator is the biggest issue for me although getting the double-tap feature back would be nice. You can test the feature easily enough in the Kasa app settings. I set mine to go full bright with a double-tap which is a nice customization versus holding down the dimmer button until full brightness is reached.
There is one other very minor issue, but again, sloppy and annoying. The dimmer level LEDs don't present in the same way as all the other Kasa switches. Only the highest level LED is lighted rather than the LED and all of the ones to the left of it. It's only in pitch dark where having only one lighted makes it difficult to know what the actual dimmer level is. Do you see the same?
- Copy Link
- Report Inappropriate Content
I checked the dimmer level indicator and you are right. When the lights in the ks230 are on its the same behavior as hs220 when the lights are *off*
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Connu , yep I agree.
I am considering buying another unit just because of the secondary switch led issue and return it to Amazon... I wonder if I can just replace the secondary switch (I guess it should be OK but I am not sure...)?
- Copy Link
- Report Inappropriate Content
Fawk ... just bought a used on from Amazon (only thing in stock) before finding this forum. Looks like it was a defective customer return with the solid amber light. It's going back ... what a waste of time.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 40
Views: 151478
Replies: 692