Sigh. After it looked so good in the beginning, and after mass upgrade on four sites, with 30+ adapers... fw 2.10 is still broken. Still adapters are locked out and do not (re?)join the network....

Regarding stability of 2.10, when upgrading one site where I had the isolation problem (in this moment just on one adapter), when upgrading the current CCO and thus on reset the CCO switched to...

@pstlr78 8010P 2.0 and 3.0 is based on the QCA7550 whereas 1.0 was based on QCA7500. I am not sure about the exact differences on PIB level between the two. I checked my pib collection, but didn't...

@pstlr78 The problem is similar to what I see. The PIB from the 2.0 firmware is an older version than 2.2 and upwards. You would need to specify a newer PIB from 2.2 fw for your adapter, and the...

@Ariek Ok, thanks! Upgrade straight from MAC-QCA7550-2.2.3.32-00-20161104-CS (which has 22k pib file) to 2.10 worked with the script (ie 8010P V2). So I will try an upgrade from 2.0 to 2.2 first to...

Ok, this PIB retrieval does not work for upgrade from MAC-QCA7500-2.0.0.382-05-20150511-CS : Minor Version Mismatch (0x48): Device refused request