@Rme1055 Yes it will still work.

@Frostbyte Your Welcome Glad to be of help. 2 or 3 wraps of tape is good.

@Frostbyte Leave the jumper wire out, just connect one black of each HS200 to the wire from the box that is feeding the jumper. Add the whites lead from each HS200 to the group of neutral wires. Add...

@Frostbyte You do have grounds, they are the wires with the smaller wire nut at the bottom of the picture. The 3 white wires with the larger wire nut at the top of the picture is your neutral.

@KuShan Connect the black wire from the switch to one of the black leads of the HS200. Connect the white wire from the switch to the other black lead of the HS200. Connect the green lead of the HS200...

@Mark_W Your Welcome Glad to hear you got it working.