TonyOnline
Following: 0Followers: 54
Forums/ Deco
2021-05-24 22:36:11
Re:Connecting a device that is set up only for wired connections.
@solluzmexico The Deco series is good for a single home but in your case since you are dealing with apartments, great distances. I would look at a business solution. For example, you can install a...
0HELPFULS
/ Wi-Fi Routers
2021-05-24 22:18:30
Re: Archer A7 AP mode not working
@PM1313 It may be due to the A7 possibly looking at the gateway as the DNS server as well. If the DHCP server is off, you can only configure the IP, subnet mas, and gateway.
0HELPFULS
Forums/ Apps
2021-05-24 22:09:26
Re:WiFi
@JahneeY If your phone is blocked from internet access, you should still be able to access the management by disabling the phone's Wi-Fi and accessing the Deco system remotely. You could use another...
0HELPFULS
Forums/ Cable Modem&Routers
2021-05-24 22:05:36
Re:TC-W7960 Modem/Router and Archer C7 Router Double NAT Issue???
@LuxNet21 The first option would get rid of a double NAT which means you have two routers connected back to back. When the 7960 was a modem, the router probably needed the DDNS servers manually set....
0HELPFULS
Forums/ Range Extenders
2021-05-21 22:58:57
Re:Invalid ip configuration on extender re200
@rafaxs I would look at the network settings of the computer. Does it sound like the computer may have a static IP address assigned to it? If so, give in an IP that is a number away from your DHCP...
0HELPFULS
Knowledge Base/ Kasa Smart Switches
2021-05-21 17:50:07
Meaning of the LED Lights on a Switch
Here is the planar structure chart of HS200: Wi-Fi status LED: Blinking Amber and Green: App-Config mode initiated. Solid Green: Successfully connected to the Wi-Fi network. Blinking Amber: Resetting...
0HELPFULS
18910...