@John.Jay.Hong Hi, when you set up a static IP address on NVR, have you also configured the DNS server as well as the gateway? Since you have already configured the static IP on the NVR, do you need...

@Rocy Hi, thank you very much for getting back to me. The firmware 1.5.6 could be downgraded back to 1.5.1 directly. But since I checked with the engineers since they confirmed the new firmware...

@azentropy Hi, it is ok to set up two networks under the same email account and it is not suggested to use the same SSID/network name. As for configuration, if the internet connection type is the...

@aging-youngster Thank you for getting back to me. I am afraid there is no beta firmware available for manual signal source selection yet and I will come back to the forum if such a beta firmware is...

@JLee Hi, since both Linksys and Deco could be worked as wireless routers, in case there is a double NAT issue during USB sharing, it is suggested to set up Deco as access point mode, such as the...

@Rocy Hi, since the firmware has been released for a while, I haven’t seen such feedback and I don’t think this issue is related to the 1.5.6 firmware. Do you still remember what is your previous...