tl-pa9020p connection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
tl-pa9020p connection
Model :
Hardware Version :
Firmware Version :
ISP :
Before I purchase the tl-pa9020p, I have a couple questions.
[*]In the US, most houses have 2 120v lines going to the circuit breaker box. I assume that both sender and receiver of the tl-pa9020p must be on the same circuit. Correct? And they will not work if one is on one circuit and the other is on the second circuit.
[*]With the tl-pa9020p, there are 2 cat 5 connections. I assume I can use 1 cat 5 port for the router and the second for another device. Correct? And on the receiver, I can use both ports for 2 devices, correct?
[*]I assume if there is any kind of filtering or spike protection, these devices will not work. Correct?
[*]I assume using an UPS with this device will not work, correct?
Hardware Version :
Firmware Version :
ISP :
Before I purchase the tl-pa9020p, I have a couple questions.
[*]In the US, most houses have 2 120v lines going to the circuit breaker box. I assume that both sender and receiver of the tl-pa9020p must be on the same circuit. Correct? And they will not work if one is on one circuit and the other is on the second circuit.
[*]With the tl-pa9020p, there are 2 cat 5 connections. I assume I can use 1 cat 5 port for the router and the second for another device. Correct? And on the receiver, I can use both ports for 2 devices, correct?
[*]I assume if there is any kind of filtering or spike protection, these devices will not work. Correct?
[*]I assume using an UPS with this device will not work, correct?
