Second DHCP Server on LAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Second DHCP Server on LAN
Model :
Hardware Version :
Firmware Version :
ISP :
Hello, everybody.
I have a new TL-WA901ND Access Point (Ver. 5.0) and I have a big problem with DHCP Service.
The LAN-DHCP set-up of the AP is:
Static IP: 192.168.3.19
DHCP Start IP: 192.168.3.41
DHCP End IP: 192.168.3.50
I have also (in my LAN) a second DHCP Server (PBX), in another subnet (192.168.1.x).
All the devices that connects to the new AP, requests and takes address from the PBX (192.168.1.x) and ignores the AP.
Can someone knows something about that?
Can my AP ignore the other DHCP server and gives the addresses by itself?
Thank you in advance.
Hardware Version :
Firmware Version :
ISP :
Hello, everybody.
I have a new TL-WA901ND Access Point (Ver. 5.0) and I have a big problem with DHCP Service.
The LAN-DHCP set-up of the AP is:
Static IP: 192.168.3.19
DHCP Start IP: 192.168.3.41
DHCP End IP: 192.168.3.50
I have also (in my LAN) a second DHCP Server (PBX), in another subnet (192.168.1.x).
All the devices that connects to the new AP, requests and takes address from the PBX (192.168.1.x) and ignores the AP.
Can someone knows something about that?
Can my AP ignore the other DHCP server and gives the addresses by itself?
Thank you in advance.
