Archer AC5400 & WD 3TB Drive not available
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AC5400 & WD 3TB Drive not available
Model : Archer C5400
Hardware Version :
Firmware Version : 161128
ISP :
I have an Archer AC5400 v1 router with a WD MyBook 3TB USB 3.0 hard drive connected to the USB 3.0 port. The drive is readable when first connected but is not available a day or two later unless I change the status of the drive on the advanced tab. I can make the drive accessible if I change the status from available to not available and the back to available.Any help would be greatly appreciated.
Hardware Version :
Firmware Version : 161128
ISP :
I have an Archer AC5400 v1 router with a WD MyBook 3TB USB 3.0 hard drive connected to the USB 3.0 port. The drive is readable when first connected but is not available a day or two later unless I change the status of the drive on the advanced tab. I can make the drive accessible if I change the status from available to not available and the back to available.Any help would be greatly appreciated.
