Need confirmation my TL-WA860RE is defective

Need confirmation my TL-WA860RE is defective

Need confirmation my TL-WA860RE is defective
Need confirmation my TL-WA860RE is defective
2 weeks ago
Model: TL-WA860RE  
Hardware Version: V5
Firmware Version:

This device has been subject to periodic 100F heat for years, so I won't feel bad if it's broken, but I need confirmation before I go to the company that installed it to replace it. I have disconnected it from power for several minutes, reset it (twice). The lights blink in the following sequence: Power: 6 times. Power: 4? times, then all three lights go on briefly. That sequence repeats.

 

An insight into what this means is appreciated, but any definitive "Yeah, it's broken" is what I need before approaching the vendor. Thanks!

  0      
  0      
#1
Options
2 Reply
Re:Need confirmation my TL-WA860RE is defective
a week ago

  @scottb 

 

To reset the RE successfully, press and hold its reset button for about 10 seconds.

What you've described seems like a boot loop and most probably the RE is defective.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Need confirmation my TL-WA860RE is defective
a week ago

  @terziyski thanks, I did the reset repeatedly.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 91

Replies: 2

Related Articles